If you have an original Forster engine and need parts, we can’t guarantee all of our parts will fit. Forster made many changes thru the years. Most common was rear intake to front intake and different venturi diameters.

As for converting glow engines to ignition, forget it! A lot more is required than a timer. M&G/Remco in Colorado made the Forsters in the 70's. These engines used a Remco .29 timer & tank (Remco timer is a lot larger than the prop drive diameter so there's a big space around the prop driver). The tank has a smaller diameter and they machined the webs out of the back of the forster case to fit. If you have one of these you should call before ordering any parts.

 
 
 


 

© RJL Industries, All rights reserved.
© Model Engine Corporation of America, All rights reserved.
Forster is a TradeMark of MECOA

No part may be reproduced without written permission from
Forster Engines are part of the MECOA product line.

MECOA - Model Engine Company of America
16015 Adelante St., Irwindale, CA 91702

www.mecoa.com